Instruction manual

DAC1 PRE

Instruction Manual Rev I Page 43

HPA2

Headphone Outputs

Number of Headphone Outputs 2

Output Connectors ¼” TRS with switch on left-hand jack

Output Impedance < 0.11 Ohms

Output Level Control Stereo Control on Front Panel

Output Level Range (at 0 dBFS) into 60-Ohm Load Off to +21 dBu

Maximum Output Current 250 mA

Overload Protection (independent per channel) Current limited at 300 mA, Thermal

Bandwidth > 500 kHz

THD+N -106 dB, 0.0005% into 30 Ohms at

+18 dBu (1.26W)

Status Display

Indicators - Type and Location 3 Blue LED’s on Front Panel

Selection/Status Indication

Solid: Digital Input Selection

Flashing: Signal Error

None: Standby Mode