S.p.A.
SpA MC 2300 INTRODUCTION Thank you for selecting a BENASSI SPA machine. This manual contains all the information and necessary data for the preservation and proper use of the machine. The better you know your agricultural machine, the safer will be your work; therefore we suggest you to read carefully and understand this “INSTRUCTIONS AND MAINTENANCE” manual before starting to work.
SpA MC 2300 2 TECHNICAL DATA OF THE ENGINES MOUNTED ON THE DIFFERENT VERSIONS TECHNICAL FEATURES MC 2300 D MC 2300 H MC 2300 HS MC 2300K MC 2300I Engine YANMAR HONDA HONDA KAMA INTERMOTORL L 48 AE DI GX 160 GC 160 KG 160 LGA 226 Weight Cultivator version Kg. 81 Kg. 70 Kg. 66,5 Kg. 69 Kg. 72 Weight Lawn mower version Kg. 85 Kg. 74 Kg. 70,5 Kg. 73 Kg.
SpA MC 2300 Engine driven cultivator version Power mower version 5 – PACKING AND TRANSPORT The machine is normally delivered packed, without accessories, in carton boxes having the following dimensions and overall dimensions: Machine packing : - WIDTH: 47 cm.- LENGTH cm: 71 - HEIGHT cm. 58 Mowing unit packing : - WIDTH: 38 cm.- LENGTH cm: 40 - HEIGHT cm. 50 Accessories are normally delivered separately from the machine; with or without packing.
SpA MC 2300 6 ‐ACCESSORIES Wheels torque 3.50.6 Cod. 97063300 Mowing unit cm. 38-48 Cod. 94761600 Wheels torque 13.500.6 Cod. 97063400 Cutting unit cm. 92 with special cutterbar and spare blade Cod. 94564600 Plough Cod. 91062500 Snow turbine cm.50 single-stage Cod. 97561200 Lister with arm Cod. 91063500 Single-blade lawn mower cm.52 Cod. 96660600 Front-end leveller Cod. 97561100 Weight for mowing bar (only for version with YANMAR engine) Cod. 98061400 Kit for wheels torque 3.50.8 Cod.
SpA MC 2300 9 –USE OF THE MACHINE The machine illustrated in this manual has been made only to be used in agriculture and mostly for the ground milling. Any use out of this agricultural one is considered an improper one. The producer disclaims all responsibility for damages or injuries resulting from the improper use of the machine. The respect of the working conditions, maintenance and repairs established by BENASSI SPA, according to the rules, are also part of the machine use.
SpA MC 2300 11‐ TOOLS MOUNTING AND MACHINE REVERSIBILITY ¾ It is very easy to mount or to change tools to the machine. Tools are all quick coupling type and don’t need screws or fastening spanners for the locking. ¾ Tools are coupled in the machine body (male and female) and locked with a pin. The pin must be locked with the lever (Ref. “B” Picture 8) in order to avoid its disengagement. ¾ Assure that the tool part (male) to couple in the machine body is always well lubricated.
SpA MC 2300 13 – START OF THE WORK Accurately inspect the work area, removing foreign objects ( iron wires, stones, sticks, glasses etc.), since they could cause dangerous and sudden reactions of the machine. Engage the clutch, the ENGINE STOP pushbutton will release itself, then put into gear and power take-off, giving little clutch-touches if it does not immediately engage. Accelerate opportunely the engine and release the clutch to start working.
SpA MC 2300 Control that the air-filter is clean, if the filter is in oil bath control the level every 8-10 hours of work or even more frequently if you are working in dusty grounds. Use engine oil to restore the oil level; before refilling the oil tank, wash it carefully. GEAR BOX Control the oil level every 50 hours of work by taking out the cap on the gearbox case (the machine must be in the horizontal position). If necessary, add oil SAE 80-90. It is suggested to change oil at least once a year .
SpA MC 2300 ¾ ¾ ¾ ¾ Never force the engine; when smoke comes out from the exhausting pipe, it means that the engine is under stress. Do not work for long periods of time at full speed, in particular during warm periods. Periodically control the tyre pressure ( Atm. 1,3) During the mounting of the different tools do not damage the dowels (Ref.
SpA MC 2300 21 ‐ CE DECLARATION CONFORMITY OF THE MACHINE 40010 San Matteo della Decima BO Italy Via Lampedusa n°1 We declare under our responsibility that the machine is conformity with the essential safety and health protection in accordance with Directive 98/37/EC, to the requirements of Directive 2000/14/EC applicable to it.
SpA MC 2300 S.p.A. VIA LAMPEDUSA 1 40010 S. MATTEO DELLA DECIMA (BO) - ITALY TEL. 0039/051/82.05.34 TELEFAX 0039/051/682.61.64 Web: www.benassi.eu e-mail: export@benassispa.
