Phau Ntawv Qhia

15
temperature at the set time. For example, if
your timer is set to start at 18:00 and
temperature is set to 23°C, the fire will come
on at 17:30 to ensure the room is 23°C at
18:00.
Window Open Detection
R32 When the transmitter detects a rapid drop in
room temperature, it will be judged as a
window open, the warning icon will be
displayed and the heating will be turned off
automatically.
R33 After the indoor temperature has risen or a
manual override of the warning (by operating
remote control) has been done, the fire will
return to normal working state.
Set up the communication between the remote
and appliance
R34 The below operations should be carried out
before programming, when changing to a
new remote or in the event the appliance
cannot be controlled by the remote:
• Hold the reset button on the appliance for 3
seconds (pen Point may needed) until you
hear 3 short beeps from the unit, release the
button.
• Press the
button on the remote, the
programming is finished when you hear 1
long beep from the appliance.
R35 Resetting the code for remote control is
necessary if the appliance operates wrongly
or the remote control does not operate
correctly.
• Open the back cover of the remote control.
• Press the Reset button on remote handset.
• Follow the steps R34