Operating Guide

18 5/8"
7 3/4"
19 3/16"
3 1/4"
14 1/2"
5 1/2"
Church Seats, Sheboygan Falls, WI 53085 Phone: [phone] Fax: [phone]
www.ChurchSeats.com
MODEL MA2155T
Seats shall be No. MA2155T as manufactured by Church Seats. Seats
shall be open front less cover for elongated bowl and injection molded of
heavy duty solid plastic. Seats shall contain DuraGuard
®
, an antimicrobial
agent. Factory-assembled “Safety-Side” arms shall be heavy-duty stain-
less steel and feature textured plastic handgrips with finger grooves. Seat
shall feature large molded-in bumpers. Seats shall have STA-TITE®,
Commercial Fastening System™, featuring concealed check hinges with
300 Series stainless steel posts and pintles that stop seat 11 degrees
beyond vertical. Color to be white.
Ring thickness is
13
/16"
Ring thickness including the bumper is 1"
Height of the seat is 2-
1
/4"
7"
24 1/2"
27 1/2"
26"
16 1/2"
MEDIC-AID
®
SEATS
• ELONGATED SEAT, OPEN FRONT LESS COVER
• SOLID PLASTIC
• DURAGUARD
®
ANTIMICROBIAL AGENT
• STAINLESS STEEL SIDE ARMS
Assemble hinges. Using wrench,
tighten until lower
portion shears off.
Finger-tighten
fastening nuts.
SERIESSERIES
• STA-TITE®, COMMERCIAL FASTENING SYSTEM™