Owner's Manual

24 25
SETTINGS
• The unit will work without sitting on the seat if the occupied seat sensor
is deactivated. (Turned off)
• If the seat sensor is deactivated, some features cannot be controlled.
(Night light on/off, silent mode on/off, and nozzle cleaning)
USER SETTING WITH THE REMOTE CONTROL
No. Function Seat
Status
Switch
Operation
Description Initial
Status
1 Silent
mode
“ ” For
longer than 3
seconds
To turn on/off
the operating
chime sound.
ON
2 Power off “ ” For
longer than 3
seconds
Press one of
Stop, Wash, Bidet,
Intensive or Dry
to power on
3 Seat sensor
bypass
“ ” For
longer than 3
seconds
Seat sensor
feature will
be deactivated
OFF
4 Night light “ ” For
longer than 3
seconds
To turn on/off the
night light
ON
5 Factory
reset
Press and
hold the Stop
button for
5 seconds
After 3 seconds, the
seat will power off.
Keep holding
another 2 seconds
and the seat will
power back on. This
completes the
factory reset process
ON
Seat sensor ‘off’ Seat sensor ‘on’ Regardless of on/off
TROUBLESHOOTING
PLEASE CHECK THE FOLLOWING POINTS BEFORE
REQUESTING REPAIR SERVICE.
Self-Diagnosis Table
Please refer to the following table and inform the exact status when
requesting repair service.
PROBLEM
CHECK LIST
Completely out of order • Check if the power plug is not connected
• Check if the power supply or outlet
has failed
Water does not spray out • Check if the water supply is turned on
• Check if water valve is open
• Check if nozzle is blocked by
foreign material
• Check if connection hose is bent
Water pressure is low • Check if screen filter is blocked and
clean if needed.
• Check if the water pressure is set at
too low level.
Water is not
warm enough
• Check if its temperature is set at off or low
level, or economy mode
Seat is not warm enough • Check if its temperature is set at off or low
level, or economy mode
No. Self Diagnosis Indication
1 Water temp sensor is
disconnected or not inserted.
LEDs of water low + middle
level blinking
2 Water temp sensor is
short-circuited or overheated
LEDs of water high + middle
level blinking
3 Seat temp sensor is
disconnected or not inserted
LEDs of water low level blinking
4 Seat temp sensor is
short-circuited or overheated
LEDs of water high level blinking