Operating Guide

Chur
ch Seats, Sheboygan Falls, WI 53085
Phone: [phone] Fax: [phone]
www
.ChurchSeats.com
Seats shall be 7600T as manufactured by Church Seats. Seats shall be
commercial weight and injection molded of solid plastic. Seat shall be
closed front with cover for elongated bowl and feature molded in
bumpers.
Seats shall have STA-TITE
®
, Commer
cial Fastening System™,
featuring 300 Series stainless steel posts and pintles. Color to be white.
Ring thickness is
5
/8"
Ring thickness including the bumper is
7
/8"
Height of the seat with cover is 1-
7
/8"
HOSPITALITY PLASTIC SEATS
MODEL 7600T
• ELONGATED SEAT, CLOSED FRONT WITH COVER
• HEAVY DUTY PLASTIC
5 1/2"
11"
8 1/4"
14 1/4"
18 3/8" 18 1/2"
• 300 SERIES STAINLESS STEEL HINGE AND BOLT
• STA-TITE
®
, COMMERCIAL FASTENING SYSTEM™
EXTERNAL CHECK HINGE
WITH 300 SERIES
ST
AINLESS
STEEL BOL
TS
STA-TITE
®
, COMMERCIAL
FASTENING SYSTEM™,
ONE-PIECE INTEGRATED
NUT AND WASHER
Using wrench,
tighten until lower
portion shears off.
Finger-tighten
fastening nuts.
0B7082198_7600T 2/10/09 9:59 AM Page 1