User`s manual

MP-4000 TH POS Printer Rev.1.4 Programmer’s Manual
22-aug-2007
Firmware Release: 1.5
64
ESC $ n
L
n
H
[Function] Set absolute print position.
[Format] ASCII ESC $ n
L
n
H
Hexadecimal 1B 24 n
L
n
H
Decimal 27 36 n
L
n
H
[Description] • Sets the distance from the beginning of the line to the position at
which subsequent characters are to be printed.
• The distance from the beginning of the line to the print position is [(n
L
+ n
H
× 256) × (vertical or horizontal motion unit)].
ESC 2
[Function] Select default line spacing.
[Format] ASCII ESC 2
Hexadecimal 1B 32
Decimal 27 50
[Description] Selects approximately 4.23 mm (1/6") spacing.
ESC 3 n
[Function] Set line spacing.
[Format] ASCII ESC 3 n
Hexadecimal 1B 33 n
Decimal 27 51 n
[Description] Sets the line spacing to [n × vertical or horizontal motion unit].
ESC \ n
L
n
H
[Function] Set relative print position.
[Format] ASCII ESC \ n
L
n
H
Hexadecimal 1B 5C n
L
n
H
Decimal 27 92 n
L
n
H
[Description] Sets the print starting position based on the current position by using
the horizontal or vertical motion unit. This command sets the distance
from the current position to [(n
L
+ n
H
× 256) × horizontal or vertical
motion unit].