User`s manual

MP-4000 TH POS Printer Rev.1.4 Programmer’s Manual

22-aug-2007

Firmware Release: 1.5

ESC S n

[Function] Enable superscript and / or subscript

[Format] ASCII ESC S n

Hexadecimal 1B 53 n

Decimal 27 83 n

[Range] n = 0, 1

[Description] Enables superscript character and or subscript.

9 When n is 0 (00h or 30h), the superscript is enabled. The

following characters are printed on the upper side of the print

line.

9 When n is 1 (01h or 31h), the subscript is enabled. The

following characters are printed on the bottom side of the print

line.

ESC T

[Function] Disable superscript and subscript modes

[Format] ASCII ESC T

Hexadecimal 1B 54

Decimal 27 84

[Description] Disables both superscript and subscript print modes.

ESC N n

[Function] Select Intensity Mode

[Format] ASCII ESC N n

Hexadecimal 1B 4E n

Decimal 27 78 n

[Range] n = 0, 1, 2, 3, 4

[Default] n = 2

[Description] Selects intensity mode.

9 When n is 0 (30h), the intensity selected is VERY WEAK.

9 When n is 1 (31h), the intensity selected is WEAK.