User`s manual

MP-4000 TH POS Printer Rev.1.4 Programmer’s Manual

22-aug-2007

Firmware Release: 1.5

GS F9h ( 0

[Function] Load default user configuration.

[Format] ASCII GS F9h ( 0

Hexadecimal 1D F9 28 30

Decimal 29 249 40 48

[Description] Reload all configurations from flash memory.

GS F9h ) 0

[Function] Print user configuration.

[Format] ASCII GS F9h ( 0

Hexadecimal 1D F9 29 30

Decimal 29 249 41 48

[Description] Print user configuration.

GS F7h BS NUL ! i1...i4 s1..s4

[Function] Set IP address and subnet mask.

[Format] ASCII GS F7h BS NUL ! i1...i4 s1..s4

Hexadecimal 1D F7 08 00 21 i1...i4 s1..s4

Decimal 29 247 08 00 33 i1...i4 s1..s4

[Description] Set IP address and subnet mask on hexadecimal format without

points.

[Example] IP 10.1.1.250 and SUBNET 255.0.0.0 must be sent as 0Ah 01h 01h

FAh FFh 00h 00h 00h

GS F9h * n

[Function] Set USB address.

[Format] ASCII GS F9h * n

Hexadecimal 1D F9 2A n

Decimal 29 249 42 n

[Description] Set USB address to allow the use of more than one printer on same

computer.