User`s manual

MP-4000 TH POS Printer Rev.1.4 Programmer’s Manual

22-aug-2007

Firmware Release: 1.5

[Description] This command has no effect when ESC/POS mode is enabled.

ESC/POS mode fixes paper/printing width to 80 mm / 76 mm.

GS F9h , n

[Function] Enable/disable paper near end sensor.

[Format] ASCII GS F9h , n

Hexadecimal 1D F9 2C n

Decimal 29 249 44 n

[Description] Enable or disable paper near end sensor (PNES).

n = 1, 31h – enable PNES

n = 0, 30h – disable PNES

GS F9h + n

[Function] Set and save printing intensity.

[Format] ASCII GS F9h + n

Hexadecimal 1D F9 2B n

Decimal 29 249 43 n

[Description] Set and save printing intensity on flash memory.

n may vary from 0 (00h, 30h) to 4 (04h, 34h), meaning weakest to

strongest printing respectively.

GS FAh n

[Function] Set printer language.

[Format] ASCII GS FAh n

Hexadecimal 1D FA n

Decimal 29 250 n

[Description] Set printer language.

n = 0, 30h – english

n = 1, 31h – portuguese

n = 2, 32h - spanish