User`s manual

87
MP-4200 TH Programmer’s Manual - Revision 1.0
GS w n
[Function] Set barcode width.
[Format]  ASCII   GSwn
    Hexadecimal  1D77n
    Decimal  29119n
[Range]  2≤n≤6
[Default]  n=3
[Description] Setbarcodehorizontalsize.nspecifiesbarcodewidthasfollows:
n Module width
(mm) for Multi-
level Barcode
Binary-level Barcode
Thin element
width (mm)
Thick element
width (mm)
2 0.250 0.250 0.625
3 0.375 0.375 1.000
4 0.500 0.500 1.250
5 0.625 0.625 1.625
6 0.750 0.750 2.000
Multi-levelbarcodesareasfollows:UPC-A,UPC-E,EAN13,EAN8,CODE93,CODE128
Binary-levelbarcodesareasfollows:CODE39,ITF,CODABAR
[Reference]  GSk
GS F9h 5 n
[Function] Select printer operating mode.
[Format]  ASCII   GSF9h5n
    Hexadecimal  1DF935n
    Decimal  2924953n
[Range]  n=0;n=1;n=48;n=49;
[Default]  n=0
[Description] Ifnis0(00hor30h),ESC/Bemaisselected.
    Ifnis1(01hor31h),ESC/POSisselected.
[Notes] This command modifies printer flags and save the new values to printer configuration memory.
GS F9h 7 n
[Function]  SetandsaveprinterdefaultcodepageforESC/Bemacommandset.
[Format]  ASCII   GSF9h7n
    Hexadecimal  1DF937n
    Decimal  2924955n
[Range]  2≤n≤12;n=14;n=21
[Default]  n=2
[Description] Thiscommandselectsthecodepagetobeused,accordingtothefollowingoptions.
Ifnis2(02hor32h),CODEPAGE850isselected.
Ifnis3(03hor33h),CODEPAGE437isselected.
Ifnis4(04hor34h),CODEPAGE860isselected.
Ifnis5(05hor35h),CODEPAGE858isselected.
Ifnis6(06hor36h),CODEPAGE866isselected.
Ifnis7(07hor37h),CODEPAGE864isselected.