User`s manual

83
MP-4200 TH Programmer’s Manual - Revision 1.0
o Third byte (Paper sensor information)
Bit Off/On Hex Dec Function
0, 1 Off 00 0 Paper roll near-end sensor: paper OK.
On 03 3 Paper roll near-end sensor: paper near end.
2, 3 Off 00 0 Paper roll end sensor: paper present.
On 0C 12 Paper roll end sensor: paper not present.
4 Off 10 16 Not used. Fixed to Off.
5, 6 - - - Undefined.
7 Off 00 0 Not used. Fixed to Off.
o Fourth byte (Paper sensor information)
Bit Off/On Hex Dec Function
0,3 - - - Undefined.
4 Off 00 0 Not used. Fixed to off.
5,6 - - - Undefined.
7 Off 00 0 Not used. Fixed to off.
[References] DLEEOT,GSr
GS f n
[Function] Select font for Human Readable Interpretation (HRI) characters.
[Format]  ASCII   GSfn
    Hexadecimal  1D66n
    Decimal  29102n
[Range]  n=0,1,48,49
[Default]  n=0
[Description] SelectafontfortheHRIcharactersusedduringabarcodeprinting.nselectsafontfromthe
following table:
n Print position
0, 48 Font C (14 x 24).
1,49 FontD(10.5x24).
[Details]  •HRIstandsforHumanReadableInterpretation.
    •HRIcharactersareprintedatthepositionspecifiedbyGSH.
[References] GSH,GSk
GS h n
[Function] Select barcode height.
[Format]  ASCII   GShn
    Hexadecimal  1D68n
    Decimal  29104n
[Range]  1≤n≤255
[Default]  n=192
[Description] Selectbarcodeheight.nspecifiesthenumberofdotsintheverticaldirection.
[Reference]  GSk