User`s manual

70
MP-4200 TH Programmer’s Manual - Revision 1.0
GS ( N p
L
p
H
f
n
[parameter]
[Function] Select character effects.
[Format]  ASCII   GS(Np
L
p
H
f
n
    Hexadecimal  1D284Ep
L
p
H
f
n
    Decimal  294078p
L
p
H
f
n
[Range] ƒ
n
=48
[Description] Selectscharactereffects,accordingtofnvalue,asdescribedinthetablebelow.
ƒ
n
Function
48 Select character color.
•p
L
, p
H
specifies (p
L
+p
H
×256)asthenumberofbytesafterp
H
(ƒ
n
and [parameter]).
[Notes]   •Settingofthiscommandaffectprintingofalphanumeric,multilingual,user-definedcharacters
and user defined ideograms.
•SettingofthiscommandiseffectiveuntilESC@isexecuted,theprinterisresetofthepower
is turned off.
•Settingofthiscommanddoesnotaffectprintingofgraphics,bitimage,barcode(including
HRI characters) and two dimension code.
•ThecolorofthegraphicscanbespecifiedbyGS(L.
•Dualcolorprintingdependsondualcolorthermalpaperusage.Color#1isblackanduses
high energy in the print head. Color #2 is red and uses low energy in the print head.
•Thiscommandiseffectiveonlyinmodelswithdualcolorfeatureenabled.
GS ( N p
L
p
H
f
n
m <f
n
= 48>
[Function] Select character color.
[Format]  ASCII   GS(Np
L
p
H
f
n
m
    Hexadecimal  1D284Ep
L
p
H
f
n
m
    Decimal  294078p
L
p
H
f
n
m
[Range] (p
L
+p
H
×256)=2(p
L
=2;p
H
=0)
ƒ
n
=48
m=48,49,50
[Default]  m=49
[Description] Selectscharactercolorspecifiedbymasfollows.
m Character color
48 Not (do not print).
49 Color #1 (Black)
50 Color #2 (Red)
[Notes]   •Whenunderlineisturnedon,theunderlinewillbeprintedinthecolorspecifiedbythisfunction.
•Inwhite/blackreverseprintmode,theprintertreatsthecharacterasnon-printingdotsand
prints the background in the color specified by this function.
•Thiscommandiseffectiveonlyinmodelswithdualcolorfeatureenabled.
GS ( k p
L
p
H
c
n
f
n
[parameters]
[Function] Specify and print symbol.
[Format]  ASCII   GS(kp
L
p
H
c
n
f
n
[parameters]
    Hexadecimal  1D286Bp
L
p
H
c
n
f
n
[parameters]
    Decimal  2940107pLp
H
c
n
f
n
[parameters]