User`s manual

57
MP-4200 TH Programmer’s Manual - Revision 1.0
Hex Decimal Width
00 0 1 (normal)
10 16 2 (double-width)
20 32 3
30 48 4
40 64 5
50 80 6
60 96 7
70 112 8
Hex Decimal Height
00 0 1 (normal)
01 1 2 (double-height)
02 2 3
03 3 4
04 4 5
05 5 6
06 6 7
07 7 8
[Details]  •Thiscommandiseffectiveonallcharacters(alphanumericandideograms),exceptonHRI
characters.
    •Ifnisoutofrange,commandisignored.
•Verticaldirectionisthepaperfeeddirection,andthehorizontaldirectionisperpendicular
tothe paperfeeddirection.However,whencharacterorientation changes for 90°clockwise-
rotation mode, the relationship between vertical and horizontal directions is reversed.
•Whencharactersareenlargedwithdifferentsizesononeline,allthecharactersontheline
are aligned at the baseline.
•TheESC!commandcanalsoturndouble-widthanddouble-heightmodesonoroff.However,
the setting of the last received command is effective.
[Reference]  ESC!
GS * x y d
1
... d
(x×y×8)
[Function]  Definedownloadedbitimage.
[Format]  ASCII   GS*xyd
1
... d
(x×y×8)
    Hexadecimal  1D2Axyd
1
... d
(x×y×8)
    Decimal  2942xyd
1
... d
(x×y×8)
[Range]  1≤x≤255
1≤y≤48
x×y≤1536
0≤d≤255
[Description] Definesadownloadedbitimageusingthenumberofdotsspecifiedbyxandy:
•xspecifiesthenumberofdotsinthehorizontaldirection.
•yspecifiesthenumberofdotsintheverticaldirection.
[Details]  •Thenumberofdotsinthehorizontaldirectionisx×8,andintheverticaldirectionisy×8.
•Ifx×yisoutofrange,thiscommandisdisabled.
•dindicatesbit-imagedata.Ifabitindata(d)isset,itwillbeprinted,whileifiscleared,the
bit will not be printed.