User`s manual

56
MP-4200 TH Programmer’s Manual - Revision 1.0
•x
L
, x
H
specifies (x
L
+x
H
×256)×8dotsinthehorizontaldirection.
•y
L
, y
H
specifies (x
L
+x
H
×256)×8dotsintheverticaldirection.
[Details]  •ThiscommandcancelsallNVbitimagesthathavealreadybeendefined.
•Theprinter cannotredefine onlyoneof severaldatadefinitionspreviouslydefined. Inthis
case, all data needs to be sent again.
•NVbitimagemeansabitimagewhichisdefinedinanon-volatilememorybyFSqandprinted
by FS p.
•Thiscommandiseffectiveonlywhenprocessedatthebeginningoftheline.
•  This command is effective when at least 7 bytes <FS~y
H
> are processed with normal
values.
•InthefirstgroupofNVbitimagesifx
L
, x
H
, y
L
, y
H
is out of range, this command is disabled.
•Afterprocessingthefirstbitimage,ifthereareotherimageswithx
L
, x
H
, y
L
, y
H
out of range,
the printer stops processing this command and starts writing already received images to NV
memory.
•Thedisdatatobeprinted.
• This command defines n as the numberof a NV bit image. Numbers shouldriseinorder,
starting from 1. Therefore, the first data group [x
L
x
H
y
L
y
H
d
1
...d
k
] is NV bit image 1, and the last
data group [x
L
x
H
y
L
y
H
d
1
...d
k
] is NV bit image n. The total number of bit images should agree
with number of NV bit images specified by command FS p.
•AdatadefinitioninNVbitimageconsistsof[x
L
x
H
y
L
y
H
d
1
...d
k
]. Therefore, when only one NV
bitimageisbeingdefined(n=1)theprinterprocessesadatagroup[x
L
x
H
y
L
y
H
d
1
...d
k
] once.
•Whenthiscommandisreceivedduringmacrodefinition,theprinterendsmacrodefinition,
and begins executing this command.
•OnceaNVbitimageisdefined,itisnoterasedbyperformingESC@,reset,orpoweroff.
[Reference] FS p
GS ! n
[Function] Select a character size.
[Format]  ASCII   GS!n
    Hexadecimal  1D21n
    Decimal  2933n
[Range]  0≤n≤255
    (1≤verticalnumberoftimes≤8,1≤horizontalnumberoftimes≤8)
[Default]  n=0
[Description] Select character height using bits 0 to 3 and selects character width using bits 4 to 7, as
follows:
Bit Off/On Hex Decimal Function
0
Character height selection.
1
2
3
4
Character width selection.
5
6
7