User`s manual

52
MP-4200 TH Programmer’s Manual - Revision 1.0
ESC c 5 n
[Function]  Enable/disablepanelbuttons.
[Format]  ASCII   ESCc5n
    Hexadecimal  1B6335n
    Decimal  279953n
[Range]  0≤n≤255
[Default]  n=0
[Description] Enableordisablepanelbuttons.
•WhentheLSBofnis0,panelbuttonsareenabled.
•WhentheLSBofnis1,panelbuttonsaredisabled.
[Details]  •Onlytheleastsignificantbitofnisused.
•Whenpanelbuttonsaredisabled,noneofthemareusablewhentheprintercoverisclosed.
•ThepanelbuttonsareFEEDandCUT.
•  In the macro ready mode, the FEED button is enabled regardless of the settings of this
command; however, the paper cannot be fed by using this button.
ESC d n
[Function] Print and feed n lines.
[Format]  ASCII   ESCdn
    Hexadecimal  1B64n
    Decimal  27100n
[Range]  0≤n≤255
[Description] Printdataavailableintheprintbufferandfeednlines.
[Details]  •Thiscommandsetstheprintstartingpositiontothebeginningoftheline.
•ThiscommanddoesnotaffectthelinespacingsetbyESC2orESC3.
• Themaximumpaper feedamount is1016mm {40”}.If the paperfeed amount(n×line
spacing)ofmorethan1016mm{40”}isspecified,theprinterfeedsthepaperonly1016mm
{40”}.
[References] ESC2,ESC3
ESC i
[Function] Perform partial paper cut.
[Format]  ASCII   ESCi
    Hexadecimal  1B69
    Decimal  27105
[Description] Performsapartialcutoftherollpaper.
ESC m
[Function] Perform partial paper cut.
[Format]  ASCII   ESCm
    Hexadecimal  1B6D
    Decimal  27109
[Description] Thiscommandoperatestheauto-cutter,performingapartialcutinthepaper.