User`s manual
48
MP-4200 TH Programmer’s Manual - Revision 1.0
•WhentheLSBofnis1,emphasizedmodeisturnedon.
[Details] •Onlytheleastsignificantbitofnisused.
•ThiscommandandESC!turnonandoffemphasizedmodeinthesameway.
[Reference] ESC!
ESC G n
[Function] Turn on/off double-strike mode.
[Format] ASCII ESCGn
Hexadecimal 1B47n
Decimal 2771n
[Range] 0≤n≤255
[Default] n=0
[Description] Turndouble-strikemodeonoroff.
•WhentheLSBofnis0,double-strikemodeisturnedoff.
•WhentheLSBofnis1,double-strikemodeisturnedon.
[Details] •Onlytheleastsignificantbitofnisused.
•Printeroutputisthesameindouble-strikemodeandinemphasizedmode.
[Reference] ESCE
ESC J n
[Function] Print and feed paper.
[Format] ASCII ESCJn
Hexadecimal 1B 4A n
Decimal 2774n
[Range] 0≤n≤255
[Default] n=0
[Description] Printdataintheprintbufferandfeedpaper[n×verticalmotionunit].
[Details] •Afterprinting,thiscommandsetstheprintpositiontothebeginningoftheline.
•ThepaperfeedamountsetbythiscommanddoesnotaffectthevaluessetbyESC2orESC3.
•VerticalmotionunitcanbespecifiedbyGSP.
•TheGSPcommandcanchangeverticalmotionunit.However,thevaluecannotbelessthan
the minimum vertical movement amount, and it must be set in even units of minimum vertical
movement amount.
•Themaximumlinespacingis1016mm{40”}.Whenthesettingvalueexceedsthemaximum,
it is converted to the maximum automatically.
[Reference] GSP
ESC M n
[Function] Select character font.
[Format] ASCII ESCMn
Hexadecimal 1B4Dn
Decimal 2777n
[Range] n=0,1,48,49
[Description] Selectacharacterfont.
n Function
0, 48 Character font C (14 x 24) selected.
1,49 CharacterfontD(10.5x24)selected.
[Details] ESC!commandcanalsoselectacharacterfont.Thesettingofthelastreceivedcommandis
effect.
[Reference] ESC!