User`s manual

46
MP-4200 TH Programmer’s Manual - Revision 1.0
ESC - n
[Function] Turn underline mode on/off.
[Format]  ASCII   ESC-n
    Hexadecimal  1B2Dn
    Decimal  2745n
[Range]  0≤n≤2,48≤n≤50
[Default]  n=0
[Description] Turnunderlinemodeonoroff,basedonthefollowingvaluesofn:
n Function
0, 48 Turn off underline mode.
1,49 Turn on underline mode (1-dot thick).
2, 50 Turn on underline mode (2-dot thick).
[Details]  •Theprintercanunderlineallcharacters(includingright-sidecharacterspacing),butcannot
underline the space set by HT.
•  The printer cannot underline 90° clockwise rotated characters and white/black inverted
characters.
•Whenunderlinemodeisturnedoffbysettingthevalueofnto0or48,thefollowingdatais
not underlined, and the underline thickness set before the mode is turned off does not change.
The default underline thickness is 1 dot.
•Changingcharactersizedoesnotaffectthecurrentunderlinethickness.
•Underlinemode canalso be turnedonor offbyusingESC!. Note, however,that thelast
received command is effective.
•Thiscommanddoesnotaffectideogramprinting.
[Reference]  ESC!
ESC 2
[Function] Select default line spacing.
[Format]  ASCII   ESC2
    Hexadecimal  1B32
    Decimal  2750
[Description] Selectapproximately4.23mm{1/6”}oflinespacing.
[Reference]  ESC3
ESC = n
[Function] Select peripheral device.
[Format]  ASCII   ESC=n
    Hexadecimal  1B3Dn
    Decimal  2761n
[Range]  1≤n≤255
[Default]  n=1
[Description] Selectdevicetosenddatafromthehostcomputer,usingnasfollows:
Bit On/Off Hex Decimal Function
0 Off 00 0 Printer disabled.
On 01 1 Printer enabled.
1-7 - - - Undefined.