User`s manual

42
MP-4200 TH Programmer’s Manual - Revision 1.0
n=4:Continuouspapersensorstatus
Continuous paper sensor status
Bit Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
2,3 Off 00 0 Paper roll near-end sensor:
paper adequate.
On 0C 12 Paper near-end is detected by
the paper roll near-end sensor.
4 On 10 16 Not used. Fixed to On.
5,6 Off 00 0 Paper roll sensor: Paper present.
On 60 96 Paper roll end detected
by paper roll sensor.
7 Off 00 0 Not used. Fixed to Off.
[References] DLEENQ,GSa,GSr
DLE ENQ n
[Function] Real-time request to printer.
[Format]  ASCII   DLEENQn
Hexadecimal 10 05 n
    Decimal  165n
[Range]  1≤n≤2
[Description] Respondstoarequestfromthehostcomputer.
n=1:Recoverfromanerrorandrestartprintingfromthelinewheretheerroroccurred.
n=2:Recoverfromanerrorafterclearingreceiveandprintbuffers.
[Notes]   Do nothing command. Implemented to adhere to ESC/POS. Auto-cutter error recovery is
performed by opening the cover and closing it again.
DLE DC4 f
n
m t (f
n
= 1)
[Function]  Generatepulseatreal-time.
[Format]  ASCII   DLEDC4f
n
m t
Hexadecimal 10 14 f
n
m t
    Decimal  1620f
n
m t
[Range]  ƒn=1
m=0,1
1≤t≤8
[Description] Outputsthepulsespecifiedbyttoconnectorpinmasfollows:
m Connector pin
0 Drawerkick-outconnectorpin2.
1 Drawerkick-outconnectorpin5.
The pulse ON or OFF time is [t × 100 ms].
[Details]  •Whentheprinterisinanerrorstatus,thiscommandisignored.
•ThiscommandisignoredwhenanESCporaDLEDC4isbeingexecutedinthesameoutput
pin.