User`s manual

41
MP-4200 TH Programmer’s Manual - Revision 1.0
n=2:Offlinestatus
Bit Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
2 Off 00 0 Cover is closed.
On 04 4 Cover is open.
3 Off 00 0 PaperisnotbeingfedbyusingtheFEEDbutton.
On 08 8 PaperisbeingfedbytheFEEDbutton.
4 On 10 16 Not used. Fixed to On.
5 Off 00 0 No paper-end stop.
On 20 32 Printing is being stopped.
6 Off 00 0 No error.
On 40 64 Erroroccurs.
7 Off 00 0 Not used. Fixed to Off.
Bit 5: Becomes on when paper end sensor detects paper end.
n=3:Errorstatus
Offline status
Bit Off/On Hex Decimal Function
0 Off 00 0 Not used. Fixed to Off.
1 On 02 2 Not used. Fixed to On.
2 – – – Undefined
3
Off 00 0 No autocutter error.
On 08 8 Autocutter error occurs.
4 On 10 16 Not used. Fixed to On.
5 Off 00 0 No unrecoverable error.
On 20 32 Unrecoverable error occurs.
6 Off 00 0 No auto-recoverable error.
On 40 64 Auto recoverable error occurs.
7 Off 00 0 Not used. Fixed to Off.
Bit3:Iftheseerrorsoccurduetopaperjam,itispossibletorecoveritbyopeningcoverand
closing it again. If an error due to a circuit failure (e.g. wire break) occurs, it is impossible to
recover.
Bit 6: Becomeson when printingisstopped due tohigh print head temperature, the printer
remains stopped until the print head temperature drops sufficiently or when the paper roll cover
is open during printing.