User`s manual

22
MP-4200 TH Programmer’s Manual - Revision 1.0
    Ifnis14(0Ehor3Eh),EUC-CNisselected.
    Ifnis21(15hor45h),CODEPAGE862isselected.
[Notes]   CODEPAGE850isthedefault.
ESC R n
[Function] Select an international character set.
[Format]  ASCII   ESCRn
Hexadecimal 1B 52 n
    Decimal  2782n
[Range]  0≤n≤12
[Default]  n=12
[Description] Thiscommandselectsthecodepagetobeused,accordingtothefollowingoptions.
    Ifnis0,CODEPAGE437isselected.
If1≤n≤11,CODEPAGE858isselected.
    Ifnis12,CODEPAGE850isselected.
[Notes] CODEPAGE850isthedefault.ThiscommandissimilartoESCtn.Thelastcommandreceived
is effective.
ESC S n
[Function]  Enablesuperscriptand/orsubscriptprintmode.
[Format]  ASCII   ESCSn
    Hexadecimal  1B53n
    Decimal  2783n
[Range]  n=0,1
[Description] Enablesuperscriptorsubscriptcharactermode.
    Ifnis0(00hor30h),thesuperscriptisenabled.Thenextarrivingcharacterswillbeprintedon
the upper side of the print line.
    Ifnis1(01hor31h),thesubscriptisenabled.Thenextarrivingcharacterswillbeprintedon
the bottom side of the print line.
ESC T
[Function]  Disablesuperscriptandsubscriptprintmodes.
[Format]  ASCII   ESCT
Hexadecimal 1B 54
    Decimal  2784
[Description] Disablebothsuperscriptandsubscriptprintmodes.
ESC N n
[Function] Select printing intensity.
[Format]  ASCII   ESCNn
    Hexadecimal  1B4En
    Decimal  2778n
[Range]  0≤n≤4
[Description] Obsolete.KeptheretomaintaincompatibilitywithearlierBematechproducts.