User`s manual

15
MP-4200 TH Programmer’s Manual - Revision 1.0
GS F7h BS NUL “ i
1
...i
4
s
1
...s
4
[Function] Set IP address and subnet mask.
[Format]  ASCII   GSF7hBSNUL“i
1
...i
4
s1...s
4
    Hexadecimal  1DF7080022i
1
...i
4
s
4
...s
4
    Decimal  292478034i
1
...i
4
s
4
...s
4
[Description] ProgramafixedIPaddressandsubnetmasktotheprinter.
[Example]  TodefineanIPaddressof10.10.1.2andasubnetmaskof255.255.0.0,thefollowingcommand
should be sent:
    1DF70800220A0A0102FFFF0000
[Notes] Valid only when ethernet or wi-fi interface is being used.
GS F7h EOT NUL ‘ g1…g4
[Function] Set default gateway IP address
[Format]  ASCII   GSF7hEOTNUL‘g1…g4
    Hexadecimal  1DF7040027g1…g4
    Decimal  292474039g1…g4
[Default]  0.0.0.0
[Description] ThiscommandsetsthedefaultgatewayIPaddress,whereg1..g4aretheIPaddressoctets.
[Notes] Valid only when ethernet or wi-fi interface is being used.
[Example]  Ifyouwanttosetthegatewayaddressto192.168.1.2thecommandmustbesentas1DF704
    0027C0A80102
GS F9h D m n
[Function] Activate buzzer on cut
[Format]  ASCII   GSF9hDmn
    Hexadecimal  1DF944mn
    Decimal  2924968mn
[Range]  0≤m≤2
    0≤n≤255
[Default]  m=0
    n=200
[Description] •Thiscommandtellstheprintertoactivethebuzzeratthesametimeofacutisbeing 
performed.
    •Thebuzzertobeactivatedisdefinedbymasfollow:
m buzzer
0 none (deactivate previous settings)
1 internal
2 external
•(n×100ms)definestheactivationtime