User`s manual

7
MP-4200 TH Programmer’s Manual - Revision 1.0
ESCm Partial paper cut x
ESCp Generatepulse x
ESCt Select character code table x
ESCun Transmit peripheral device status x
ESCv Transmit paper sensor status x
ESC{ Turn upside-down printing mode on/off x
FS p Print NV bit image x
FS q DefineNVbitimage x
GS! Select character size x
GS* Definedownloadedbitimage x
GS/ Print downloaded bit image x
GS(A Executetestprint x
GS(D Enable/disablereal-timecommand x
GS8L
GS(L
Process graphics data
x
GS(N Select character effects x
GS(k Specify and print symbol x x
GS: Start/end macro definition x x
GSB Turn white/black reverse printing mode on/off x
GSH Select printing position of HRI characters x
GSI TransmitprinterID x
GSL Set left margin x x
GSP Set horizontal and vertical motion units x
GSV Select cut mode and cut paper x x
GSW Set printing area width x x
GS^ Executemacro x
GSa Enable/disableAutomaticStatusBack(ASB) x x
GSf Select font for HRI characters x
GSh Set bar code height x
GSk Print bar code x
GSr Transmit status x
GSv0 Print raster bit image x
GSw Set bar code width x
Notes:- x means command enabled.