User`s manual

93
MP-4200 TH Programmer’s Manual - Revision 1.0
GS F8h F
[Function] Printer reset.
[Format]  ASCII   GSF8hF
    Hexadecimal  1DF846
    Decimal  2924870
[Description] Forceahardwareresetontheprinter.
GS F9h D m n
[Function] Activate buzzer on cut.
[Format]  ASCII   GSF9hDmn
    Hexadecimal  1DF944mn
    Decimal  2924968mn
[Range]  m=0,1,2
    0≤n≤255
[Default]  m=0,n=2
[Description] Setbuzzeractivationonpapercut.
Ifm=0nobuzzerisactivated
Ifm=1theinternalbuzzerisactivated
Ifm=2theexternalbuzzerisactivated
The activation time is n x 100ms.
GS F9h E n
[Function]  SetDHCPusage.
[Format]  ASCII   GSF9hEn
    Hexadecimal  1DF945n
    Decimal  2924969n
[Range]  0≤n≤255
[Default]  n=0
[Description] IfLSBofnis1,theDHCPisenabled.
GS F7h BS NUL “ i
1
...i
4
s
1
...s
4
[Function] Set IP address and subnet mask.
[Format]  ASCII   GSF7hBSNUL“i
1
...i
4
s
1
...s
4
    Hexadecimal  1DF7080022i
1
...i
4
s
4
...s
4
    Decimal  292478034i
1
...i
4
s
4
...s
4
[Description] ProgramafixedIPaddressandsubnetmasktotheprinter.
[Example]  TodefineanIPaddressof10.10.1.2andasubnetmaskof255.255.0.0,thefollowingcommand
should be send:
    1DF70800220A0A0102FFFF0000
[Notes]   ValidonlywhenEthernetinterfaceisbeingused.
FS ! n
[Function] Set print mode(s) for ideograms.
[Format]  ASCII   FS!n
Hexadecimal 1C 21 n
    Decimal  2833n
[Range]  0≤n≤255
[Default]  n=0
[Description] Setprintmodeforideograms,usingnasfollows: