LV4000U LCD Pole Display
Contents Warning ................................................................................... 3 FCC Warning Statement .......................................................... 3 Introduction ............................................................................ 4 Features ......................................................................................4 Unpacking the display ..............................................................4 Installation ......................................
Warning It will cause malfunction if the monitor is operating with incorrect power voltage. Do not exposure this unit in the rain or moisture environment to reduce the risk of fire or electric shock. FCC Warning Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Introduction LV4000U is a color TFT LCD display with compact and ecological design. The power consumption is only 2.5W with LED backlight. 1. Features a. 8.4” LCD display with LED backlight b. Optimal display resolution 800 * 600 c. No ventilation hole design d. Light weight, only 1.5lb physically for display without the pole and base. e. VESA 75 * 75 mm wall mount standard f. True flat panel screen 2. Unpacking the display a.
Installation Assembly 1. Remove the four screws on base metal plate. 2. Pass the USB cable through the base from bottom. 3. Pass the USB cable through the pole from the bottom. 4. Reinstall the metal plate and attach the pole onto the stand base. 5. Pass USB cable through the hinge cover. 6. Plug the USB cable to the monitor. 7. Attached the hinge cover to the monitor with four screws. 8. Install monitor module to pole. 9. Installation complete.
Driver Installation Guide PC requirements USB Monitor software can be used on PCs, from Netbooks, Notebooks/Laptops to Desktops. The driver will run on processors ranging from Atom N270 based PCs, basic single Core CPUs, and the latest Dual, Quad Core and Core i3/i5/i7 CPUs. The performance of the software is dependent upon the processing power available, as well as the Operating system in use. More capable systems offer higher performance.
a. 1.2GHz Single Core CPU b. 512MB memory 2. For 3 monitors where 1 could run DVD video while also targeting productivity and business apps. Will support only 1 video of DVD resolution at full screen: a. 1.6GHz CPU b. 1GB memory 3. For 6 screens where 1 screen can run full screen DVD video: a. 1.8GHz Core Duo b. 1GB memory c. At least one USB 2.0 port. d. 30 megabytes (MB) of free disk space. e. Computer screen for use with the DisplayLink device, if it is not integrated. f.
Graphics Card Support (Windows 2000/XP) All graphics cards are supported on Windows 2000/XP. Supported Languages Unsupported languages default to English. The following languages are supported in version 5.
Installing the USB Monitor Software » » » Make sure to connect the USB cable and begin the installation after your PC has booted. The Setup program requires about one minute for the installation. If you turn the power off or remove the USB cable while the Setup program is running, it may cause an error with the PC or the Windows operating system. The optimal resolution for this USB monitor is 800 x 600. 1. Insert CD into the CD-ROM drive. Click "USB Monitor Driver" 2. Click "I Accept". 3.
5. When the installation is completed, configure the following settings to use multiple monitors. a. Right-click on the “Windows Desktop” and select “Properties” from the displayed menu. The “Display Properties” window appears. b. Select the “Settings” tab. A list of connected USB monitors is displayed. c. Arrange the monitors displayed in the 'Display Properties' window in the order they are actually used. d. Then click "OK" button.
Configuring the 7" USB Monitor Display Information 1. When the driver setup for the USB monitor is finished, a monitor icon is created in the system tray at the bottom of the monitor screen. 2. Click the monitor icon to display a list of connected USB monitors. Select the monitor for which you want to configure the display settings. You can configure the "Screen Resolution", "Color Quality" and "Screen Rotation" settings for your monitor.
3. A list of the installed device will be displayed, as shown in the figure below.
Restrictions on the 8.4” USB Monitor Supported OS (Operating Systems) » Windows XP Service Pack 1 or earlier: Unsupported Service Pack 2 or later: Supported » Windows 2000 Service Pack 3 or earlier: Not Supported Service Pack 4 or later: Supported » Windows Server 2003: Not Supported » Windows Vista: Supported. To check the information on the operating system of your PC, right-click “My Computer” on the “Windows Desktop” and select “Properties” from the displayed menu.
Troubleshooting 1. There is no image on the screen. I cannot turn on the monitor. Check whether the USB cable is connected correctly. Check whether the USB driver is installed. The USB monitor is recognized as a general USB device on a PC. If you turn the monitor on or off quickly and repeatedly, the USB device problem may occur. Refer to the USB device Troubleshooting section on the Microsoft customer support website. 1. Right-click the “My Computer” and click on “Properties” 2.
5. Q&A Q: How I can clone or extend screen mode? A: Open the ”Display Properties” window and select the “Settings” tab, Q: How can I remove the “USB Monitor Installation Program” completely? A: Click “Add/Remove Programs” in the “Control Panel”. A list of “currently installed programs” is displayed. Select “DisplayLink Graphics” from the list and click “Remove”. Q: The screen size of the USB monitor is larger than the actual monitor size.
Mechanical dimensions 34,45 63,5 75 4-M4*0.
Product General Specification Model LV4000U Color Black Display size 8.4" Display Area 170.4 * 127.8 mm Optimal Resolution 800 * 600 Brightness 230 cd/m² (typ) Contrast Ratio 600:1 (typ) Response Time 8 ms (typ) 150 degrees (H) LCD Viewing Angle 130 degrees (V) Input signal connector USB Type B Horizontal: 31.5-60.2 kHz Input Frequency Vertical : 56.3Hz~75Hz Power consumption 500mA/2.
Limited Warranty Policy All LV3000 feature a three-year-limited warranty from the date of purchase. If product is determined to be defective, we will repair or replace the product with refurbished or remanufactured parts or components during the warranty period. This warranty is valid only for the first consumer purchaser. This warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence, commercial use or modifications of, or to any part of the product.
LV4000U LCD Pole Display 19
