User manual

LC8700 User Manual Rev. 1.0

1. The Option “Boot Display Device” allows you to select video output behavior during

booting procedure (before OS takes over):

 VBIOS-Default

 CRT  VGA only

 LVDS  output to DVI-I

 CRT + LVDS  output to VGA/DVI-I

2. The Option “DVI Resolution Select” allows you to choose the maximum resolution for

the DVI-I output

Networking booting

If you desire to enable your system to boot from a network go to [Chipset] in the main menu.

Then select <South Bridge Configuration] and enable the option “LAN Option ROM”.

Restore to Optimized Defaults

If the BIOS settings are accidently changed and it’s necessary to restore setting to the optimal

default values, select menu [Load Optimized Defaults] and select [OK] on the confirmation dialog

box. Then select [Save Changes and Exit] (or press [F10]) to save the changes.