User manual
LC8700 User Manual Rev. 1.0
14
Mounting the LC8700 to the wall with the mounting brackets
Allow at least 3 inches of space from the top of the unit and 6 inches from the sides to
allow proper ventilation. See the picture below:
1. push two mounting brackets out
ο See Picture 7 β 8.
2. drill the LC8700 on with wood screws (2 pieces - 1/8" x 1" 1/2)
ο See picture 9.
The screws must be driven on the wood studs if it is a dry wall.
Using concrete wall anchors (2 pieces - 1/16" x 3/8") if it is a concrete wall.
The LC8700 is a fanless and ventless unit and heat is dissipated through the metal
case. So, allow at least 6 inches of space from the top of the unit and 3 inches from the
sides to allow proper ventilation. Itβs recommended to mount the unit vertically to
maximize ventilation effect. Vertical mounting stands are available from Bematech.