User manual

8 9

Connect the Mini USB jack to the USB charging port on the unit. The

charging indicator on the Mobile Speaker will light up while charging

It will take about 2 hours to fully charge the Mobile speaker

Charging Indicator Light Modes

• Red LED / Flashing Fast: Battery is low, charge the unit soon.

• Red LED / Flashing Slow: Mobile Speaker is charging

• Green LED: Battery is fully charged

Note: if the unit has not been used in the past 7 days please charge

for 10 minutes before using the Mobile Speaker.

Troubleshooting

Issue: Pairing is unsuccessfully after multiple attempts

Solution:

• Check if the Bluetooth© indicator light is on. If the indicator

light is off, please press the power button to turn the unit on.

If the Bluetooth© indicator light still doesn’t come on after

pressing the power button, please charge the unit.

• Check for other Bluetooth© devices around the surroundings

that may interfere with searching and turn devices off.

• Power off and then power on the unit to restart the Bluetooth©

Operation Details (cont.)

function of the unit or your Bluetooth device

• Unplug any cables plugged into the AUX IN, restart all devices

and then attempt pairing again.

Issue: Interference or static during playback

Solution:

• Avoid using the device between concrete or other building

structures that may interfere with the signal.

device and charge if necessary.

For more troubleshooting help go to http://bemwireless.com

Maintenance

Please follow the instructions below for cleaning your Mobile Speaker

• Power off the unit

• Use a soft, dry, lint-free cloth and wipe gently

• Do not use alcohol, benzene, thinners or other chemical

detergents as these can cause the casing to be warped or

discolored