Owner's Manual

2
Includes 16 Driver Selectable Features
5 Operating Modes 11 General Features
Normal Mode
Modifications Mode
Quick-Start X Band (10.525 GHz) On/Off
Tech Mode
Voltage Meter Mode K Band (24.125 GHz) On/Off
Super Wideband Ka (33.4-36.0)
AccuSweep™
Operating modes are
Selected using PWR Button
See page 00.
AutoMute On/Off
Radar/Laser Digital Voice
Prompts On/Off
Safety Warning System
™
On/Off
Safety Warning System Digital
Voice or Tone
Audio/Visual Scroll Rate
Fast/Slow
Inverted Display Option
AutoScan
General Features selected by pressing
.
VECTOR 960 and VECTOR 940 provide Driver Selectable
Features. Driver Selectable Features allow you to “customize” how
alerts will be presented to you.
4 Operating Modes
VECTOR 960
3 Operating Modes
VECTOR 940
1
. NORMAL Mode
A lengthy power up test
sequence; text messages identify
alerts received, i.e. “
XX BBaa nn dd
”.
2. MODIFICATIONS Mode
Full Power-up test sequence;
presents ONLY those General
Selectable Features which you
have altered from factory pre-set.
Te xt messages identify alerts received.
3. QUICK START Mode
No test sequence; unit immediately
shows last used traveling
mode:“
AAuu tt oo SScc aa nn
™
”,
“
HHii gg hh ww aa yy
”, “
CCiitt yy XX
”
“
CCiitt yy AALLLL
”, Te xt messages
identify alerts received.
4. TECH Mode
(V960 only)
Full Power-up text sequence.
Te xt messages identify band received
followed by ACTUAL police traffic
radar or Laser frequency, i.e.,
“
2244..115500
” to confirm K band.
7 General Selectable Features
VECTOR 960
6 General Selectable Features
VECTOR 940
1
. AutoMute ON or OFF
2. Radar/Laser Digital
Voice or Tone
(Model V960)
2. Radar/Laser/SWS
™
Digital Voice or Tone
(Model V940)
3. Safety Warning System
™
ON/OFF
4. Safety Warning System
™
Digital Voice ON or OFF
(Model V960)
5. Audio/Visual Scroll Rate:
FAST or SLOW
6. Inverted Display Option
ON or OFF
7. AutoScan
™
, “Highway”,
“City X”or “City ALL.”
Operating Modes are
selected using the PWR button.
( see page 5 .)
General Selectable Features are
accessed by pressing the PWR and
CTY buttons simultaneously, when
the unit is OFF. (see page 14.)
Note: for convenience AutoScan
™
is accessed using the CTY button.
(see page 9 .)