Beltronics 5442 West Chester Road West Chester OH 45069 USA USA 800-341-2288 www.beltronics.com ©2006 Beltronics Designed and Manufactured In Canada Features, specifications and prices subject to change without notice.
Congratulations If you’ve used a radar detector before, a review of the Quick Reference Guide on pages 4 and 5, and the Programming information on pages 12 and 13 will briefly explain the new features. If this is your first detector, please read the manual in detail to get the most out of your V955’s outstanding performance and innovative features. Please drive safely.
Quick Reference Card H Remove card along perforations Table of Contents H BELTRONICS V955 Quick Reference Card Press the RVW button to go from one category to the next PILOT VOICE AUTOMUTE CITY MODE SENSITIVITY BANDS * Full word: Highway or AutoScan or City Voice ON Voice OFF * Voice alerts on PwrOn STD PwrOn FST * Standard power-on sequence aMute ON aMute OFF * AutoMute on City STD City LoX City NoX Bands DFT Bands MOD Letter: H or A or C Voice alerts off Fast power-on sequence AutoMut
Quick Reference Guide To begin using your V955, just follow these simple steps 1 QuickMount Slot Insert the V955’s adjustable Windshield mount into this slot. Page 7 Plug the small end of the power cord into the side jack of the detector, and plug the large end of the power cord into your car’s lighter socket. QuickMount Button Press the button, and slide the Windshield mount into one of its four locking positions. Page 7 2 Mount your V955 on the windshield using the supplied windshield mount.
Installation Power Connection Mounting Location Windshield QuickMount To power your V955, plug the small end of the power cord, (telephone-type connector) into the modular jack on the V955’s right side, and plug the lighter plug adapter into your vehicle’s lighter socket or accessory socket. WARNING: BELTRONICS cannot anticipate the many ways the V955 can be mounted. It is important that you mount your V955 where it will not impair your view nor present a hazard in case of an accident.
Controls and Features Power Voice Alerts Highway / AutoScan / City Button Brightness To turn your V955 on or off, press the PWR button located on the top. When you turn your V955 on, it goes through a sequence of alerts. If you prefer, you may program your V955 for a shorter power-on sequence. See the Programming section for details. The V955 provides digital voice announcements of radar and laser bands detected. If Safety Radar (SWS) is turned on, a safety radar message will also be announced.
Controls and Features Programming Power Connector Audible Alerts The V955’s power jack uses a telephonetype connector. This 4-conductor connector only works with the included power cord, optional direct-wire, or SmartPlug cord. For more information or to order, call us toll-free at 1-800-341-2288. For Radar signals: Your V955 uses a Geiger-counter-like sound to indicate the signal strength and type of radar signal being encountered.
Overview of Programming Details of Programming Press the REVIEW button to go from one category to the next Press the CHANGE button to change your setting within a category PILOT (Power-on indication) Pilot HWY Pilot H * Full word: Highway or AutoScan or City Letter: H or A or C VOICE Voice ON Voice OFF * Voice alerts on Voice alerts off POWER-ON SEQUENCE PwrOn STD PwrOn FST * Standard power-on sequence Fast power-on sequence AUTOMUTE CITY MODE SENSITIVITY BANDS aMute ON aMute OFF City STD Ci
Details of Programming Technical Details City Mode Sensitivity Bands City STD (Standard) In this setting, when you put your V955 in the City mode, X-band sensitivity is significantly reduced, to reduce annoyance from X-band intrusion alarms and motion sensors. (factory default) BandsDFT In this setting, all North American radar and laser frequencies are monitored. This is the factory setting and it is recommended that you use your V955 in this mode.
Technical Details Interpreting Alerts Although the V955 has a comprehensive warning system and this handbook is as complete as we can make it, only experience will teach you what to expect from your V955 and how to interpret what it tells you. The specific type of radar being used, the type of transmission (continuous or instant-on) and the location of the radar source affect the radar alerts you receive.
Technical Details How Radar Works Radar range also depends on the power of the radar equipment itself. The strength of the radar unit’s beam diminishes with distance. The farther the radar has to travel, the less energy it has for speed detection. Because intrusion alarms and motion sensors often operate on the same frequency as radar, your V955 will occasionally receive non-police radar signals.
Technical Details How Safety Radar Works Since Safety radar technology is relatively new, and the number of transmitters in operation is not yet widespread, you will not receive Safety signals on a daily basis. Do not be surprised if you encounter emergency vehicles, road hazards and railroad crossings that are unequipped with these transmitters. As Safety transmitters become more prevalent (the number of operating transmitters is growing every day), these Safety radar signals will become more common.
Troubleshooting Problem Solution Problem Solution The V955 beeps briefly at the same location every day, but no radar source is in sight. • An X or K-band motion sensor or intrusion alarm is located within range of your route. With time, you will learn predictable patterns of these signals. Your 14-year old son has changed all 6 of the Programming options. • You can return all of the programming options to the factory defaults by holding down the CITY and BRT buttons while you turn the V955 on.
Service Warranty and Accessories Service Procedure Out Of Warranty Repairs If your V955 ever needs service, please follow these simple steps: For out of warranty repairs, include prepayment in the amount you were quoted by the Beltronics Customer Service Representative. If the detector has been damaged, abused or modified, the repair cost will be calculated on a parts and labor basis. If it exceeds the basic repair charge, you will be contacted with a quotation.
D I G I T A L R A D A R • 955 L A S E R 26 • S A F E T Y D E T E C T O R Remove card along perforations .com 27 H @ www. beltronics online: H Place of Purchase__________________________________ Date_________ Price____________ Primary reason for purchasing this BELTRONICS product____________________________________ 3. 4.
H Remove card along perforations ATTN CUSTOMER SERVICE BELTRONICS INC 5442 WEST CHESTER RD WEST CHESTER OH 45069-9789 H 28
