Owner's Manual

Details of Programming
Bands
BandsALL
In this setting, all North American radar and
laser frequencies are monitored. This is the
factory setting and it is recommended that
you use your V10 in this mode.
BandsMOD
In this setting, V10 will warn you with an
audible alert, and associated text message
stating which band is turned off (i.e. “SWS
OFF”). This warning is displayed during the
start up sequence (standard or fast).
WARNING: Only modify bands if
you are absolutely certain that there
are no traffic radar units using that
specific band in your area.
16 17
Features and Specifications
Operating Bands
• X-band 10.525 GHz ±25 MHz
• K-band 24.150 GHz ±100 MHz
• Ka-band 34.700 GHz ±1300 MHz
• Laser 904nm, 33 MHz bandwidth
Radar Receiver / Detector Type
• Superheterodyne, GaAs FET VCO
• Scanning Frequency Discriminator
• Digital Signal Processing (DSP)
Laser Detection
• Quantum Limited Video Receiver
• Multiple Laser Diodes
Display
• 280 LED Alphanumeric
• Bar Graph, Threat Display,
or Tech Display
• 3 Levels of Brightness,
plus Dark Mode
Power Requirement
•
12VDC, Negative Ground
• SmartCord (included)
Programmable Features
• Power-On Indication
• Voice Alerts
• Power-On Sequence
• Signal Strength Meter
• AutoMute
• City Mode Sensitivity
• Radar / Laser Bands
Sensitivity Control
• Highway, AutoScan and City
Auto Calibration Circuitry
VG2 Immunity
Dimensions (Inches)
• 1.25 H x 2.75 W x 4.75 L
Technical Details