Owner`s manual

14 15
City Mode Sensitivity
City STD (Standard)
In this setting, when you put your Pro200
in the City mode, X-band sensitivity is
significantly reduced, to reduce annoyance
from X-band intrusion alarms and motion
sensors. (factory default)
City LoX (Low X band sensitivity)
In this setting, when you put your Pro200
in the City mode, X-band sensitivity is
reduced more than the standard setting.
This will reduce X-band alarms from other
sources even further, but also significantly
reduces range to X-band traffic radar.
City NoX (No X-band sensitivity)
In this setting, when you put your Pro200
in the City mode, Pro200 will not respond
to any X-band signals.
NOTE: These settings only apply
when the Pro200 is operated in
City mode. X-band sensitivity is not
affected when used in “AutoScan”
or “Highway” modes.
WARNING: Only choose this setting
if you are absolutely certain that
there are no X-band traffic radar
units where you drive.
Bands
BandsDFT
In this setting, all North American radar and
laser frequencies are monitored. This is the
factory setting and it is recommended that
you use your Pro200 in this mode.
BandsMOD
In this setting, your Pro200 will warn you
with an audible alert, and associated text
message stating which band has changed
from the original factory setting (i.e. “SWS
ON”). This warning is displayed during the
start up sequence (standard or fast).
Details of Programming
Features and Specifications
Operating Bands
• X-band 10.525 GHz ±
25 MHz
• K-band 24.150 GHz ±
100 MHz
• Ka-band 34.700 GHz ±
1300 MHz
• Laser 904nm, 33 MHz bandwidth
Radar Receiver / Detector Type
• Superheterodyne, VTO
• Scanning Frequency Discriminator
• Digital Signal Processing (DSP)
Laser Detection
• Quantum Limited Video Receiver
• Multiple Laser Sensor Diodes
Display Type
• 280 LED Alphanumeric
• Bar Graph
• 3 Levels of Brightness,
plus Dark Mode
Power Requirement
• 12VDC, Negative Ground
• Power cord (included)
Programmable Features
• Power-On Indication
• Voice Alerts
• Power-On Sequence
• AutoMute
• City Mode Sensitivity
• Bands
Sensitivity Control
• Highway, AutoScan and City
Auto Calibration Circuitry
VG2 Immunity
Dimensions (Inches)
• 1.25 H x 2.75 W x 4.75 L
Technical Details