Owner`s manual
Table of Contents
Introduction I
• Congratulations I
• Important Warning I
• Quick Reference Guide 4
Controls and Features 5-8
• Power 5
• Power-On Indication 5
• AutoMute 5
• Volume/Mute 5
• Remote Mute Button 5
• Highway / AutoScan / City Switch 6
• Display Brightness 6
• Audible Alerts 6
• Signal Strength Meter 7
• Threat Display
™
7
• TechDisplay
™
8
• Laser Blockers
™
8
Programming 9-13
• How to use Programming 9
• Example of Programming 9
• Overview of Programming 10
• Details of Programming 11-13
Technical Details 14-19
• Interpreting Alerts 14-15
• How Radar Works 16
• How Laser Works 17
• How Safety Radar Works 18-19
Service 20-25
• Troubleshooting 20-21
• Service 22
• Warranty 22
• Specifications 25
32
Quick Reference Card
Bel Pro Remote Quick Reference Card
* Factory Default Settings
** Available only with External Speaker
Remove card along perforations
Remove card along perforations
Press the REV button
to go from one category
to the next
PILOT LIGHT
POWER-ON SEQUENCE
SIGNAL STRENGTH METER
AUTOMUTE
VOICE**
CITY MODE SENSITIVITY
BRIGHTNESS
BANDS
Pilot HWY
Pilot H
Pilot V
PwrOn STD
PwrOn FST
Meter STD
Meter THT
Meter TEC
aMute ON
aMute OFF
Voice On
Voice Off
City STD
City LoX
City NoX
Brt AUTO
Brt MIN
Brt MED
Brt MAX
Brt DARK
Bands ALL
Bands MOD
XONor OFF
KONor OFF
Ka ON or OFF
LSR ON or OFF or BLCK
SWS ON or OFF
Press the CHANGE button
to change your setting
within a category
* Full word: Highway or Auto or City
Letter: H or A or C
Vehicle voltage
* Standard power-on sequence
Fast power-on sequence
* Standard signal strength meter
Threat Display
™
TechDisplay
™
* AMute On
AMute Off
* Voice on
Voice off
* Standard City mode sensitivity
Low X band sensitivity in City Mode
No X band sensitivity in City Mode
* Brightness adjusts automatically
Minimum brightness when turned on
Medium brightness when turned on
Maximum brightness when turned on
Dark Mode when RX75 PLUS turned on
* All bands enabled
One or more bands has been modified
Turn bands “ON” or “OFF” by
pressing the VOL/MUTE button