Specifications

Activating the City X Mode will not change Super
Wideband Ka, K or instant-on X band Radar alert patterns.
Note—the CITY mode does not change the presentation of alerts
for Laser sws
™
or VG-2 signals.
City ALL (X/K/Ka)
City ALL provides an alternated approach for improving X,
K and Ka band selectivity and is ideal for use in areas with a
high level of microwave transmissions which can cause falsing
on all three bands. To engage City X/K/Ka mode, press CITY
until the Display shows a capital “A”. Once engaged, weak X, K
or Super Wideband Ka signals encountered will provide no
audible alerts until the signal strength reaches a preset level.
Visual alerts are processed the instant an X, K or Super
Wideband Ka signal is detected, keeping you quietly informed.
Reset to Factory Settings
You can reset your unit to factory settings for volume, DARK,
AUDIO, CITY and Selectable Features. With the unit OFF, press
and hold CITY button then press the AUD and PWR/VOL buttons
simultaneously. Two “beeps” and “F” in the digital display,
confirm that the unit is reset to the original factory settings.
your unit is now ON and ready for operation.
Safety Warning System
®
, VG-2 Guard
®
Alert, sws
™
Digital
Voice Messages and Digital Voice prompts for Radar/Laser/
VG-2 Guard
®
are all features which may be selected ON or OFF,
depending upon your preference.These Selectable Features are
referenced by the digits #1, #2, #3 and #4 respectively.
Safety Warning System
®
(sws
™
)—DIGIT #1
When ON, EXPRESS 925 will provide an sws
™
warning when sws
™
transmitters are detected. Factory setting is ON.
SELECTABLE FEATURES
8