Specifications

Fitting to the windscreen:
1. Assemble the mounting bracket as indicated in figure
2.
2. Remove the mounting bracket cover on top of the
unit by pushing in the rough part and at the same
time sliding it backwards. Keep the cover safely.
3. Clean the windscreen at the point at which you
intend to fit the unit, place the suction cups against
the windscreen and press each suction cup firmly.
4. You can adjust the angle of the mounting bracket so
that it is horizontal.
See figure 3.
5. Slide the detector on to the base plate until it clicks
into place. See figure 4.
TM
9
Figure 2
Figure 4
Figure 3