Specifications

General guidelines

Do not mount the detector directly behind the wind-

screen wipers or any reflective strips applied to the top

of the windscreen. These block radar and laser signals

and substantially reduce the sensitivity of the unit and

probability of detection. Normal tinted glass does not

affect the reception of radar or laser signals. This is in

contrast to the solar-reflecting windscreens used by some

car manufacturers. Radar signals are also reflected by

heated windscreens, available as an option on certain

vehicles. This type of windscreen will prevent a radar

detector from functioning correctly if mounted on the

dashboard or visor or behind the windscreen. In case of

doubt we advise you to contact your dealer. For optimum

performance, observe the following basic guidelines,

regardless of the chosen mounting point:

1. When selecting a mounting point, take account of

passenger safety. Choose a mounting point at which

the unit cannot present a danger to yourself or pas-

sengers.

2. For optimum detection install the detector in such a

way that it has unhindered reception from front and

rear and is not obstructed.

3. Ensure that the detector does not touch the wind-

screen. This will avoid unnecessary vibration.

4. Do not place the detector in direct sunlight. In the

summer the temperature in a closed car can get so

high that this will be detrimental to the life of the

detector.

5. The detector is not waterproof. If it comes into con-

tact with water, electronic circuits may be damaged.

Defects caused in this way are not covered by the

warranty.

The detector can be fitted in 3 different

ways:

• Fitting to the windscreen

• Fitting to the sun visor

• Mounting on the dashboard

INSTALLATION