Specifications

PWR button (On-off / start-up mode):

press

PWR

to switch the unit on. The DEMO, FAST START

and START-UP modes can also be activated with the

PWR

knob.

Display for text messages:

all the selected set-

tings are shown in this display. The radar band and

signal strength and the presence of laser equipment

are also indicated in the display.

DRK button (Maximum / Dim / Minimum):

for

adjusting the display brightness to your require-

ments.

AUD button (Volume adjustment):

for adjusting

the detector volume or switching the sound off enti-

rely during a radar alert.

CTY button (Motorway /City / City All):

You can

choose between motorway and city mode in order to

increase the sensitivity of the detector on motorways

and to reduce the sensitivity in areas with many

radar sources.

Antenna opening:

this side of the detector should

point to the front of the vehicle.

Optical sensors for laser signals:

these capture

laser signals transmitted from in front of or behind

the vehicle.

Loudspeaker:

for emitting all audible signals.

Connection for power supply:

the TARGET EURO

550 is connected using the connecting cable sup-

plied with the unit and can be used in any vehicle

with a 12 volt power supply.

OVERVIEW OF OPERATING CONTROLS AND

COMPONENTS OF YOUR TARGET EURO 550