Specifications
Radar-alert signals
When a radar signal is detected the detector indicates the
relevant radar waveband with a voice message and the
radar frequency is indicated in the display. The alert sig-
nals from your TARGET EURO 550 are affected both by the
position of the radar source and by reflective objects in
the immediate vicinity (e.g. other traffic, crash barriers
and traffic signs). If you are driving towards a radar sour-
ce, the intensity of the received signal increases. As a
result, the display shows both more signal blocks and a
higher numerical value (1-9), and you hear more audible
signals with shorter intervals.
Laser alert signal
When a laser signal is detected, the detector reports with
a voice message that there is a
“LASER ALERT”
and the
text message
LASER
flashes in the display. You also hear
a clear audible signal.
Warning indicating a laser detection.
Total Tracking Laser™ (TTL™)
In contrast to radar signals, which are highly reflective,
laser signals hardly reflect at all. Many current laser
detectors are not sensitive enough to detect laser signals
in a wide “field of vision”. The TARGET EURO 550 is
equipped with the best in laser detection technology
from Beltronics. Double laser gates detect not only the
energy of the main laser beam, but even signals far outsi-
de the axis of the main beam. This provides a maximum
“field of vision” of 360°. The alert signals emitted by the
detector are identical, regardless of whether the signals
are received from in front of or behind the vehicle.
Voltage meter
The vehicle-battery voltage is measured continuously.
This guarantees that the detector is functioning optimal-
ly. The correct supply voltage for the detector is between
10.5 and 16 V. If the voltage exceeds 16.0 V, the messa-
ge
HVoltage
will flash in the display. The message will
not disappear from the display until the voltage is back
to a normal level again. If the voltage falls below 10.5 V,
the message
Battery
appears in the display. In this case
too, the message will not disappear from the display until
the voltage is back to a normal level again.
TM
AUDIBLE WARNINGS
4