Specifications

18
TM
* If N. America has been selected you can only choose between switching the X, K or Ka band on or off.
Mute on/off
Action:
with the AUD button select whether
you want to switch Mute on or off.
A tick after the Mute means that
the function is active. A horizontal
line means that Mute is not active.
RL Voice/ Tone
Action:
using the AUD button select whether
you wish to receive tone or voice messa-
ges from your detector.
SCRL (scroll)
Action:
with the AUD button select SCRL
slow/long or SCRL fast and close with PWR
Ready:
Confirm
your
choice
with PWR
Ready:
Confirm
your choi-
ce with
PWR
Next?
Press CTY.
RL Tone or RL Voice will
appear in the display.
Proceed with:
RL Voice/Tone
Next?
Press CTY.
SCRL fast or SCRL long
will appear in the dis-
play Proceed with:
Scroll
Result:
the indication "EXIT" will appear
briefly in the display, followed by:
motorway, City or City All.
Modifications are stored in memory.
NB:
On detection of a Ku-band signal, no
spoken message is given. In this case
you will hear the standard audible signal
on Ku-band detection.
Important:
If you have changed frequen-
cies pertaining to a specific
country and wish to reset such
changes to the factory setting,
proceed as follows:
Select the country to which the
change relates (see set country
on page 13) and then hold the
CTY button down until RESET
appears in the display. Release
the CTY button. "R-xxxxxx" will
appear in the display, with the
country you have selected
appearing instead of xxxxxx.
The factory settings for this
country now apply again. Any
changes you have made to the
programming of other countries
remain unchanged.