Specifications

If the standard factory setting on your TARGET EURO 550

do not meet your requirements, you have the option to

change them.

The following programming modifications are permitted:

• Change language (see also page 17)

• Add or remove frequencies

• Select Ka broad or narrow band (Ka Narrow / Ka

Swide)

Important!

In Europe, with the exeption of the UK,

it is advisable to select Ka Narrow and then to make

a selection from the available frequencies. Ka Swide

is intended only for use of your detector in North

America.

• Switch Audio mute on or off (if you select audio

mute off, on receiving a radar signal the detector

will warn you with continuous audible signals. If you

select audio mute on, the alert signal will change to

a discreet clicking signal immediately after the first

indication).

• Choice of tone or voice reporting of radar and laser

alerts.

• Set the scroll speed (this is the speed at which text

messages follow each other in the display.

The buttons on top of your detector have the following

functions during programming:

PWR:

confirm and close (the changes are stored)

DRK:

AUD:

selection button

CTY:

A tick after an option means that the option is switched

on; a horizontal line after an option means that the

option is switched off.

PROGRAMMING YOUR TARGET EURO 550

(ADDITIONAL SETTINGS)