Specifications

TM
15
Setting Dim
Action:
press the DRK button and keep it pressed in.
Result: the indication "Dim set" will appear in the
display.
Action: keep the DRK button pressed in until the des-
ired intensity of the "Dim" setting appears in
the display. You can chose from 8 different
settings. The maximum intensity is indicated
by means of a short audible signal.
Result: the dim setting you have selected has been
stored in the memory. Each time you select
the "Dim" option in the display illumination
menu the information in the display will be
shown at the intensity you have selected.
Signal suppression
Action:
press the CTY button briefly.
Result: the indication Motorway, City or City All. will
appear permanently in the display.
Explanation:
Selecting "City" or "City All" does not affect the detecto-
r's reception sensitivity. At these settings the detector
continues to receive the radar signals with the same sen-
sitivity as if "motorway" were chosen. In the "City" and
"City All" settings, however, you are only warned by
acoustic signals once a certain signal-strength threshold
is exceeded. However, if "City" or "City All" has been
selected, you will see a warning appear in the display
even below this signal level.
• City; only the X band, where applicable, is suppressed.
• City All (= All Bands); all bands selected by the
detector or subsequently by yourself, are suppressed.
• Motorway; none of the frequencies is suppressed.
The detector warns you immediately with audible
signals as soon as a radar source is detected.
Use City or City All only in areas where the "Motorway"
setting could result in a large or excessively large number
of unnecessary alerts as a result of door openers or other
radar sources.