Datasheet

Manufacturer reserve the right to alter or amend the design, model and specification without prior notice
6. PRECAUTIONS TO ENSURE THE SAFETY ON BANDING BATTERY
1.
Batteries should be charged prior to use.
2.
.When using a new battery for the first time or after long term storage, please fully charge the battery before
use.
3.
For charging methods please reference to our technical handbook.
4.
Use the correct charger for Ni-Cd or Ni-MH batteries.
5.
Do not reverse charge batteries.
6.
Do not short circuit batteries, permanent damage to batteries may result.
7.
Do not incinerate or
mutilate batteries, may burst or release toxic material.
8.
Do not solder directly to cells or batteries.
9.
Do not subject batteries to adverse condition such as extreme temperature, deep cycling and excessive
overcharge/overdischarge.
10.
Store batteries in a cool dry place.
11.
Do not mix FBTECH batteries with other battery brands or batteries of a different chemistry such as alkaline
and zinc carbon.
12.
Do not mix new batteries in use with semi-used batteries, overd
ischarge may occur.
13.
Avoid batteries being used in an airtight compartment. Ventilation should be provided inside the battery
compartment; otherwise batteries may generate hydrogen gas, which could cause an explosion if exposed to
an ignition source.
14.
BELTRONA GmbH & Co. KG
electronic components
Schmeienstraße 50
D-72510 Stetten a.k.M.
Telefon [phone]
Telefax [phone]
www.beltrona.de
[e-mail]
BELNIMH1/3AA
1.2V 300 mAh
5 / 8