Specifications

VI LEAK CHECK

BEFORE LIGHTING YOUR GRILL: Turn your L.P. gas supply on and test all fittings for leaks,

before attempting to light grill, be certain all control valves are in the 'OFF' position. Slowly turn the

gas supply on (leaving control valves in the 'OFF' position) and check all connections with a solution

of 50% liquid soap, 50% water. Solution can be sprayed on with a spray bottle or painted on all

connections with a brush. Soap bubbles will appear where a leak is present. If a leak is present,

immediately turn off gas supply, tighten fittings and try again.

Check for leaks at least each time you refill the tank and each time you relocate your grill to a new

location.

WARNING: Do not smoke while leak testing. Never leak test with an open flame.

Do not use the PORTA-GRILL



until all connections have been checked and do not leak.