Specifications

www.belson.com
14
XII ASSEMBLY INSTRUCTIONS
PG-2460-AI, ALL TRAILER ADAPTER
(SECTION A) TRAILER ASSEMBLY
1.
Lay trailer frame on flat surface, with axle mounting brackets upward.
2. Attach axle assembly to frame as shown in Fig. 1A. Using bolts, nuts and
spacers provided. It may be necessary to tap the springs into place using a hammer.
3. Attach ball coupler to tongue assembly using (2) each 3/8"-16x3" bolts, lock
washers and nuts provided as shown in Fig. 2A
.
4. Attach tongue assembly to trailer frame using (2) each 1/2"-13x3" bolts, lock
washers and nuts provided as shown in Fig. 2A.
5. Mount tire and wheel assembly on axle hubs using lug bolts provided.
6. Turn trailer assembly over on wheels.
7. Attach tongue jack with retaining ring as shown in Fig. 3A.
8. Attach tail light brackets to trailer frame using (4) each 1/4"-20x3" bolts, As
shown in Fig. 4A.
9. Mount tail lights on brackets using nuts and lock washers provided.
10. Attach adapter box to trailer frame using (4) each 3/8"-16x3" bolts, lock
washers and nuts provided. Note: Fender mounting holes are closest to tail lights.
11. Attach fenders to adapter box using (4) each 3/8"-16x3/4" bolts, lock washers and
nuts provided.