Instruction manual

PAGE 8
PARC
PARCPARC
PARC
PARC
PARCPARC
PARC
MOW
MOW MOW
MOW
MOW
MOW MOW
MOW
-
--
-
-
--
-
BIG
BIGBIG
BIG
BIG
BIGBIG
BIG
MOW
MOW MOW
MOW
MOW
MOW MOW
MOW
Setting up the
Setting up the Setting up the
Setting up the peripheral wire
peripheral wireperipheral wire
peripheral wire:
::
: Island
IslandIsland
Island s
ss
s (3)
(3)(3)
(3)
→
Island connector configuration:
→ The cable set up is the 1G1.5 mm² or the 3G1.5 mm², single strand wire.
→
The blue or black cable is used for the peripheral wire.
→
The red cable is used for the return from an island. When an island is created at more
than 5
metres from the peripheral wire, the same sheath is used for the return of the signal.
This enables the signal to be cancelled and the machine to cross
.
→
The yellow cable is only used for special connections.
Pay attention to the direction of the island and its connections (the cables may not be
crossed). When the peripheral wire is cabled in a clockwise direction, the island is cabled in
an anti-clockwise direction
.
IT IS ESSENTIAL TO USE THE 1.5 mm² CABLE IN A SEALED TUBE
Any cable other than the 1.5 mm² single strand wire is to be avoided. Belro-
botics does not guarantee the operation of the machine with another cable.
Any problem that occurs because of incorrect set-up annuls the guarantee.