Instruction manual

PARC
PARCPARC
PARC
PARC
PARCPARC
PARC
MOW
MOW MOW
MOW
MOW
MOW MOW
MOW
-
--
-
-
--
-
BIG
BIGBIG
BIG
BIG
BIGBIG
BIG
MOW
MOW MOW
MOW
MOW
MOW MOW
MOW
PAGE 25
Important points to verify
Important points to verify Important points to verify
Important points to verify (2)
(2)(2)
(2)
• During use:
1. Remove from the terrain any object that might block the cutting heads, e.g. tree
branches, tools, planks of wood, bars…
2. Do not restart (several times!) the machine when there is a safety alert.
3. Do not carry the machine on a wheelbarrow, pallet truck…
4. The “systematic mode” option on a complex terrain will not operate properly because of
the complexity of the terrain (the machine will not go everywhere).
5. When the grass has not been cut for several days, lower the cutting heads from 1 to 2
notches maximum per day to have a perfect lawn after 8 to 10 days.
6. Leave the machine on when it is connected to its charging station. (do not switch off)
7. Tow the machine manually (in order not to have motor resistance, leave the machine on).
Do not tow the machine with a tractor, quad or other engine going at a speed faster than
human pace.
8. Don’t switch off the machine on charge.
IT IS ESSENTIAL TO USE THE 1.5 mm² CABLE IN A SEALED TUBE
Any cable other than the 1.5 mm² single strand wire is to be avoided. Belro-
botics does not guarantee the operation of the machine with another cable.
Any problem that occurs because of incorrect set-up annuls the guarantee.
Check of the state of a terrain before use
(Bigmow, Ballpicker, Parcmow)
These machines have been made to operate on lawns.
Their use on “off road” annuls all guarantees.
Terrains where there is not a difference in level of more than 2.5 cm depth in a
maximum of 10 cm in width, tested with a lathe, will still be considered as lawns.