Instruction manual

PAGE 16
PARC
PARCPARC
PARC
PARC
PARCPARC
PARC
MOW
MOW MOW
MOW
MOW
MOW MOW
MOW
-
--
-
-
--
-
BIG
BIGBIG
BIG
BIG
BIGBIG
BIG
MOW
MOW MOW
MOW
MOW
MOW MOW
MOW
Con
ConCon
Conf
ff
figu
iguigu
igura
rara
rat
tt
tion: Settings (2)
ion: Settings (2)ion: Settings (2)
ion: Settings (2)
• Setting of the password Enables the modification of the user code.
1. Indication Menu (C to return to the Menu).
2.
Type “# ▼” Settings “# ▼ ▼” New Code “#” (that is “# ▼ # ▼ ▼ #”).
3. Enter the old code “
✱ _ _ _ _’’ . To confirm, press “#”.
4. Enter the new code “ # _ _ _ _’’ . To confirm, press “#”.
5. Press C 3 times until the Menu is displayed.
6. Enter the new code before starting
7. Enter the new code “ ✱ _ _ _ _”.
8. Enter the names of the day of validity of the code (except for the programme version 2009).
Warning, when the machine protection is activated, you must reintroduce its code at the end of
the validity, or the machine stops and requests its code.
• Setting the language
Give a choice between français, English, Deutsch, italiano, español and Nederlands.
1. Indication Menu (C to return to the Menu)
2. Type “# ▼” Settings “# ▼ ▼ ▼” Language “#” (that is “# ▼ # ▼ ▼ ▼ #”)
3. Select the language by pressing “
▼” ; Validate with “#”
4. Press “C” 3 times until the Menu is displayed.
5. Restart the machine by pressing on the keypad and close the cover within 8 seconds.
• See debug F3
Enables either the time, or the service information
(technical information) to be displayed.
1. Indication
Menu (C to return to the Menu)
2. Type “F3”
Indication of the phase in the middle of the screen.
Technical information instead of the time:
- P03 equivalent in the place of hours (P03 in the authorised parameters)
- P04 equivalent in the place of minutes (P04 in the authorised parameters)
Φ
ΦΦ
Φ+ : Machine within its mowing area
Φ
Φ Φ
Φ − : Machine outside ilts mowing area
Phase