Instruction manual

PAGE 15
PARC
PARCPARC
PARC
PARC
PARCPARC
PARC
MOW
MOW MOW
MOW
MOW
MOW MOW
MOW
-
--
-
-
--
-
BIG
BIGBIG
BIG
BIG
BIGBIG
BIG
MOW
MOW MOW
MOW
MOW
MOW MOW
MOW
Configuration: Settings (1)
“SETTINGS” MENU
• Rests settings
Allows the programming of up to four rest ranges during which the machine does not work.
1. Indication Menu (C to return to the Menu)
2. Type “# ▼”Settings “#” Rests settings “#” Rest
range 1#
“#” Rest hours “#” (that is “# ▼ # # # #”).
3. Encode HH:MM for the start of rest then HH:MM
end of rest. To confirm, type “
#”.
4. Choose the day or days of the week during which
this timetable applies scrolling with
▼ and ▲. To
select the day, type “
✱”. When the days have
been chosen, type “
#”.
5. You have returned to the rest range 2#. If you would like to encode other rest times for
other days, follow steps 2 to 5 again. A maximum 4 rest areas can be programmed.
Then, press “
C” several times until the Menu is displayed on the screen.
6. Restart the machine by pressing on the keypad and close the cover within 8
seconds.
The rest ranges are programmed and operational. If you have any doubts with regard to the programming of the
rest ranges, do not hesitate to contact your dealer, who will do it for you
.
• Setting the clock Enable the modification of the time and the date.
1. Indication
Menu (C to return to the Menu).
2. Type “# ▼” Settings “# ▼” Clock “#” (that is “# ▼ # ▼ #”).
3. Enter the time “HH:MM’’ “
0 … 9”.
4. Enter the day (1=Monday;…...; 7=Sunday).
5. Press “▼”.
6. Enter the date “DD/MM”.
7. Enter the year 20_ _ “
0 … 9”.
8. Confirm by pressing “
#”.
9. Press “C” 3 times until the Menu is displayed.
10. Restart the machine by pressing on the keypad and close the cover within 8 seconds
Range 1# : _ _ : _ _ → _ _ : _ _
Mon Tue Wed Thu Fri Sat Sun
Range 2# : _ _ : _ _ → _ _ : _ _
Mon Tue Wed Thu Fri Sat Sun
Range 3# : _ _ : _ _ → _ _ : _ _
Mon Tue Wed Thu Fri Sat Sun
Range 4# : _ _ : _ _ → _ _ : _ _
Mon Tue Wed Thu Fri Sat Sun