Instruction manual

PAGE 10
PARC
PARCPARC
PARC
PARC
PARCPARC
PARC
MOW
MOW MOW
MOW
MOW
MOW MOW
MOW
-
--
-
-
--
-
BIG
BIGBIG
BIG
BIG
BIGBIG
BIG
MOW
MOW MOW
MOW
MOW
MOW MOW
MOW
Setting up the charging station
Setting up the charging station Setting up the charging station
Setting up the charging station (2)
(2)(2)
(2)
→ Cabling
1.
Bring the cables back below the station (make the holes ad hoc).
2.
Use the sheath (tube) of the peripheral wire to bring the peripheral wires to the station
(avoid any contact with the ground
).
3.
Connections:
4.
Constitutive components:
BREAKER
BOX
TRANSFOR-
MER
230V~/30V~
Power supply 230V~ ou115V~*
Peripheral wire
connections
Station →2008
*230V~: blue and orange wire
*115V~: blue and green wire
Station 2008 →
*230V~: specific transformer
*115V~: specific transformer
Power supply connections
Peripheral wire connections
IT IS ESSENTIAL TO USE THE 1.5 mm² CABLE IN A SEALED TUBE
Any cable other than the 1.5 mm² single strand wire is to be avoided. Belro-
botics does not guarantee the operation of the machine with another cable.
Any problem that occurs because of incorrect set-up annuls the guarantee.