Datasheet

PRODUCT SPECIFICATION
REVISION: ECR/ECN NUMBER: DOCUMENT NUMBER SHEET No.
1
EK2017-0***
PS-80397-001
4 of 11
DATE: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
2017 / 05/ 22
Eric Bai
TEMPLATE FILENAME: PRODUCT_SPEC
REV 0.1,SHEET
SIZE
A4
20070830
2
Contact
Resistance
(Low Level)
Mate connectors: apply a maximum
voltage of 20 mV and a current of
100 mA.
Measurement is made from the solder tail
of the receptacle to the soldering point of
the plug (including any internal paddle
cards, contacts and substrates of the plug
and receptacle).
Per EIA-364-23B
40 milliohms ,[initial]
MAX. PER CONTACT
10 milliohms MAX.
(change from initial)
3
Dielectric
Withstanding
Voltage
Unmated & mated connectors: apply a
voltage of 100 VAC (RMS) for 1 minute
between adjacent contacts.
Per EIA-364-20
No Breakdown
4
Insulation
Resistance
Unmated & mated connectors: apply a
voltage of 500 VDC between adjacent
contacts.
Per EIA-364-21
100 Megohms MIN.
5 Temperature Rise
Mate connectors:
Apply 5.0 A to VBUS pins and 1.25A to
VCONN pins with the return path through
the corresponding GND pins. A minimum
current of 0.25A shall also be applied
individually to all the other contacts.
The temperature rise above shall not
exceed 30℃ at any point on the mated
plug and receptacle under test.
The ambient condition is still air at 25℃
Per EIA-364-70, Method 2
Temperature rise:
+30℃ MAX.
5.3 MECHANICAL REQUIREMENTS
TEM
TEST
DESCRIPTION
TEST CONDITION
REQUIREMENT
6 Mating Force
Operation Speed：[ 12.5 ] mm/min.
Measure the force required to mate
connector.
Per EIA-364-13
5N to 20N
7 Unmating Force
Operation Speed：[ 12.5 ] mm/min.
Measure the force required to unmate
connector
Per EIA-364-13
8N to 20N from 1 to 1000
cycles
6N to 20N f
rom 1000 to10000
cycles
8 Durability
Operation Speed：200cycle per hour.
Durability Cycles：10000 Cycles
(EIA-364-09)
No evidence of physical
damage
9
Durability
(Preconditioning)
Perform 50 unplug/plug cycles (EIA-364-
09 )
No evidence of physical
damage